Eschewing the tradition of accentuated verticality in high-rises, the Absolute Towers choose not to emphasize vertical lines. Instead, the design features a smooth, unbroken balcony that wraps each floor of the building. In addition, at each successive level, the floor plate rotates in a range of one to eight degrees affording breathtaking panoramas of the Mississauga skyline concluding in reverence to the principle street intersection at its peak. By maximizing the viewing potentials inside and out, creating a wonderful medium for social interaction throughout the balconies, and connecting the city dwellers with naturalistic design principles, Mississauga is infused with a new character.
There are two towers in this project. The height of Building E is 157.9 meters / 518 feet with 50 floors above the ground, and the height of Building D is 175.6 meters / 576 feet with 56 floors above the ground.
 |
| Site plan |
Before modeling, we analyzed some data from the internet to find out the regulation of the twist for the building, so we can use a formula to control the generation of the form. Actually, all floor plans were not routed by a same angle, and the angle range from 1 degree to 8 degrees. But, in this practice, we just route each floor by a same angle based on the previous floor plan. The ground floor is routed by -10 degrees, and the roof is routed by 198 degrees. So we set the routing angle at 3.7 degrees, however, this angle can be easily changed in controlling formula depending on the appearance of the form in the model.
 |
| Floor plan of Builidng D |
Now we start modeling the building in Revit. The screenshots shows the key steps of the process, and some words will help to demonstrate the process.
First, we create an adaptive ellipse mass for the floor. Make sure the template is Metric Generic Model Adaptive. We should create an adaptive family, so the floor plan can be routed on different height.
Create a reference line and divide it into 51 sections;
Load the ellipse into the project;
Load the ellipse into the project;
Generate Mass
Create a new architectural project and load the mass into the project;
Build mass floor and curtain system
Final rendering
Citation
cant do it
ReplyDeletecan you help for more details ??
Original creator from MAD architects here. Good Project you have here, ever though Revit is the last tool I would choose to study form.
ReplyDelete